To configure alternate profiles under IEEE PTP Clock on a 7705 SAR
Before you begin
The 7705 SAR supports a number of PTP profiles. For networks deployed using specific profile, support to inter-work with other profiles is provided. Initially defined profile functions as a primary profile and alternate profiles can be configured to be assigned to desired PTP ports.
Note: Alternate profile configuration is supported only on a Master CSM clock and with primary clock profile type G.8275.1.
A maximum of 2 alternate profiles can be configured.
Steps
1 |
On the equipment tree, expand Network→NE→Shelf→Synchronization. |
2 |
Right-click on the PTP Clock 32 and choose Properties. The ptp (Edit) form opens. |
3 |
On the CSM Clock Alternate Profiles panel, click Create or choose a profile entry and click Properties. The PTP CSM clock Alternate Profile (Create|Edit) form opens. |
4 |
Configure the required parameters on the General tab. |
5 |
Save your changes and close the forms. End of steps |