To configure an AA Tether Detection policy
Purpose
An AA Tether Detection policy is created automatically when an ISA-AA group and its associated AA Group policy is created on a 7450 ESS NE. The Subcriber Scale parameter of the ISA-AA group must be configured to Mobile Gateway or another Gateway setting, depending on the NE release.
See To configure an ISA-AA group and ISA-AA partitions to create an ISA-AA group. Use this procedure to complete the configuration.
Steps
1 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens. |
2 |
Select an AA Tether Detection policy and click Properties. |
3 |
Configure the required parameters on the General tab. |
4 |
Click on the TTL Monitoring tab. |
5 |
Configure the required parameters. |
6 |
Click on the Single Device Expected TTLs tab. |
7 |
Click Create. The Expected TTL, Global Policy (Create) form opens. |
8 |
Configure up to 16 TTLs. |
9 |
Click Apply. |
10 |
Distribute the policy to NEs, as required. |
11 |
Close the forms. End of steps |