To configure DHCP clients on SAR devices
Overview
The SAR-Hm can be configured to support IP/MPLS services over WLAN. This requires that the SAR-Hm act as a WLAN station, and alternatively act as both an AP and station concurrently to create a WLAN topology as necessary.
You can configure DHCP clients on a network interface with WLAN or an Ethernet port.
From NFM-P, Release 22.2 and later, the 7705 SAR-Hmc can be configured to support IP/MPLS services on Network Interface with Ethernet Port.
Steps
1 |
In the navigation tree routing view, expand Network→NE→Routing Instance→Interface. |
2 |
Right-click on the interface that you want to configure and choose Properties. The Network Interface (Edit) form opens. |
3 |
Click on the DHCP Client tab. |
4 |
Click Create, or select a DHCP client and click Properties. The DHCP Client form opens. |
5 |
Configure the required parameters. |
6 |
Save your changes and close the forms. End of steps |