To view the unmanaged MC synchronization peer of an NE
Purpose
Perform this procedure to view an MC synchronization peer when only one NE in the MC synchronization group is managed by the NFM-P.
Note: This procedure assumes that you have already configured an MC peer group with an associated MC synchronization group. If only one NE is managed by the NFM-P, you must create these objects from the CLI.
Steps
1 |
On the equipment view, right-click on the NE where you want to view an MC synchronization peer and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the Redundancy tab, and then on the MC Peer tab. |
3 |
Click Search. A list of MC peers is displayed. |
4 |
Select an MC peer and click Properties. The MC Peer (Edit) form opens. |
5 |
Click on the Synchronization Protocol tab. |
6 |
Click Search. A list of MC synchronization peers is displayed. |
7 |
Select an MC synchronization peer and click Properties. The MC Sync (Edit) form opens. |
8 |
View the information, as required. |
9 |
Close the MC Sync (Edit) form. |
10 |
Close the MC Peer (Edit) form. |
11 |
Close the Network Element (Edit) form. End of steps |