To enable or disable hardware timestamps for ports on the 7210 SAS
When to use
For ports on the supported 7210 SAS, perform the following to enable or disable hardware timestamps for ingress and egress PTP packets.
Steps
1 |
On the equipment tree, navigate to the port object on the required 7210 SAS NE. The path is Network→NE→Shelf→Card Slot n→Daughter Card Slot n→Port n/n/n. |
2 |
Right-click on the required port and choose Properties. The Physical Port (Edit) form opens. |
3 |
On the General tab, in the PTP panel, configure the Enable PTP Hardware Timestamp parameter. |
4 |
Save your changes and close the form. End of steps |