To configure LLDP-MED
Before you begin
LLDP-MED (Media Endpoint Discovery) is an extension to LLDP to support interoperability between VoIP endpoint devices and other networking end-devices. LLDP-MED is focused mainly on discovery running between network devices and endpoints such as IP phones.
LLDP-MED configuration is supported only on 7210 SAS-S/Sx from Release 20.9 R1 onwards and on 7210 SAS-Dxp from Release 22.3 R1 onwards.
Steps
1 |
On the equipment tree, expand Network→NE→Shelf→Card Slot n→Daughter Card Slotn→Port n/n/n. |
2 |
Right-click on the Port icon and choose Properties. The Physical Port (Edit) form opens. |
3 |
Click on the LLDP tab and then on Nearest Bridge tab. |
4 |
Click on the LLDP MED sub-tab and configure the required parameters. Associate LLDP network policies. To create LLDP MED Network Policy, See To configure LLDP MED Network Policy |
5 |
Save your changes and close the forms. End of steps |