|
|
1 |
On the equipment tree, expand Network→1830–TPS NE→Shelf→Card Slot→Port object and choose Properties. The Physical Port (Edit) form opens.
|
2 |
Click on the Provision RoE Flow button. The RoE BaseBand Unit form opens.
|
3 |
Specify the Radio Unit, Radio Type, and number of carriers appropriate for the end point.
|
4 |
Click Select and choose the remote TPS port for the flow.
|
5 |
If you have already created mappers and demappers for the port, enable the Reuse Provisioned Mappers/Demappers parameter.
|
6 |
Specify the antennas on the BBU by performing the following:
-
In the BBU Antennas panel, click on the Create button. The RoE BBU Data form opens.
-
Configure the bandwidth, and the number of antennas with that bandwidth.
-
Click OK. An entry appears in the BBU Antennas panel.
|
7 |
Click OK. The NFM-P configures the port parameters, mappers, and demappers for the specified port and antennas.
End of steps |