|
|
1 |
Choose Manage→Redundancy→Node Redundancy from the NFM-P main menu. The Manage Node Redundancy form opens.
|
2 |
Choose MC Peer Group (Multi-Chassis) from the drop-down menu and click Search. A list of MC peer groups is displayed.
|
3 |
Select an MC peer group and click Properties. The MC Peer Group (Edit) form opens.
|
4 |
Before you can configure an MC IPsec peer, you must administratively disable the tunnel groups associated with the peer site. As required, administratively disable the associated tunnel groups.
-
Click Properties beside the First Peer Site ID or Second Peer Site ID parameter in the MC IPsec panel. The MC IPsec (Edit) form opens.
-
Click on the Tunnel Groups tab.
-
Select a tunnel group and click Properties. The MC IPsec Tunnel Group (Edit) form opens.
-
Set the Administrative State parameter to Down.
-
Click OK. The MC IPsec Tunnel Group (Edit) form closes.
|
5 |
Click on the General tab and configure the parameters.
|
6 |
Click OK. The MC IPsec (Edit) form closes.
|
7 |
Administratively enable the disabled tunnel groups. Perform the following:
-
Click Properties beside the First Peer Site ID or Second Peer Site ID parameter in the MC IPsec panel. The MC IPsec (Edit) form opens.
-
Click on the Tunnel Groups tab.
-
Select a tunnel group and click Properties. The MC IPsec Tunnel Group (Edit) form opens.
-
Set the Administrative State parameter to Up.
-
Click OK. The MC IPsec Tunnel Group (Edit) form closes.
|
8 |
Close the MC Peer Group (Edit) form.
|
9 |
Close the Manage Node Redundancy form.
End of steps |