To configure a Hardware Aggregate Shaper Scheduler policy
Purpose
The Hardware Aggregate Shaper Scheduler policy improves reaction time and downstream bursts for aggregate-rate enforcement at subscriber level.
It improves on other deficiencies of traditional HQoS, such as potential for underrun during weight-based BW distribution between different queues.
Steps
1 |
Choose Policies→QoS→SROS QoS→Scheduler→Hardware Aggregate Shaper Scheduler from the NFM-P main menu. The Hardware Aggregate Shaper Scheduler form opens. |
2 |
Click Create or choose an existing Hardware Aggregate Shaper Scheduler policy and click Properties. The Hardware Aggregate Shaper Scheduler Policy (Create) form opens. |
3 |
Configure the required parameters on the General tab. |
4 |
In the Group tab, click Create to enter the Displayed Name parameter. |
5 |
Click OK to save changes. |
6 |
Click the Scheduler Class tab to configure the scheduler class entries.
|
7 |
Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs. End of steps |