To configure a Multi-Chassis shunting profile on a base routing instance or VPRN routing instance

Steps
 

Perform one of the following:

  1. Configure a Multi-Chassis shunting profile on a base routing instance.

    Perform the following steps:
    1. In the navigation tree routing view, expand Network→NE→Routing Instance.

    2. Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.

  2. Configure a Multi-Chassis shunting profile on a VPRN routing instance.

    Perform the following steps:
    1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

    2. Choose a VPRN service and click Properties. The VPRN Service (Edit) form opens.

    3. On the VPRN Service tree, click on the site to which you need to configure a Multi-Chassis shunt interface.

    4. Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.


Click on the IPSec tab, then on the MC Shunting Profile tab.


Create or select an entry and click Properties. The Multi-Chassis Shunting Profile (Create/Edit) form opens.


Configure the required parameters.


Click on the MC Peer tab.


Create or select an entry and click Properties. The Multi-Chassis Shunting Profile Peer (Create/Edit) form opens.


Configure the required parameters.


Configure the Shunt Interface parameter.


Save your changes and close the forms.

End of steps