To configure an 1830 VWM shelf
Before you begin
The 1830 VWM manages passive devices SFD-96, SFD-44, BMU-P, and AMP as shelves. The following procedure may be used to configure passive devices as well as shelves.
Steps
1 |
On the equipment tree, expand Network→1830–VWM-OSU NE. | |||||||||||||||||||||||||||||||||||||||
2 |
Right-click on the 1830–VWM-OSU NE object and choose Configure Shelf. The Shelf (Create) form opens. | |||||||||||||||||||||||||||||||||||||||
3 |
Configure the parameters in the Shelf Details panel. The following shelf types and passive devices can be configured:
| |||||||||||||||||||||||||||||||||||||||
4 |
Save your changes and close the form. End of steps |