To configure NTP on 1830 VWM OSU devices
NTP on 1830 VWM devices
The 1830 VWM OSU has three NTP servers and the RMUs (Remote Managed Units include TLUs and PMUs) have one NTP server. You can configure the NTP parameters only on the 1830 VWM OSU device. The parameters are read-only on the other 1830 VWM devices.
Steps
1 |
On the equipment tree, expand Network→1830 VWM OSU→1830 VWM OSU Shelf . |
2 |
Right-click on the 1830 VWM OSU Shelf object and choose Properties. The Shelf (Edit) form opens. |
3 |
Click on the NTP tab and configure the required parameters in the General sub-tab. |
4 |
Click on the Server tab, choose an NTP server, and click Properties. The NTP Server (Edit) form opens. |
5 |
Configure the IP Address parameter. |
6 |
Save and close the forms. End of steps |