To configure MAC or VLAN authentication
Before you begin
Consider the following before you configure MAC or VLAN authentication:
-
You cannot configure MAC authentication and VLAN authentication simultaneously on the same port.
-
Before you can configure MAC authentication, the system resource profile for the NE must be appropriately configured. See To configure the global system resource profile on a 7210 SAS or 7250 IXR and To configure a system resource profile policy for the 7210 SAS-R/T/Mxp, 7210 SAS-S/Sx, or 7210 SAS-S/Sx VC.
Steps
1 |
On the equipment tree, navigate to the port object where you want to configure MAC or VLAN authentication. The path is Network→NE→Shelf→Card Slot n→Daughter Card Slot n→Port n/n/n. |
2 |
Right-click on the required port and choose Properties. The Physical Port (Edit) form opens. |
3 |
Click on the 802.1x Port Authenticator tab. |
4 |
Set the Controlled Port Control parameter to Auto. |
5 |
Perform one of the following:
|
6 |
Save your changes and close the forms. End of steps |