|
|
1 |
On the equipment tree, expand Network→7705 SAR-Hm→Shelf→Card Slot 1→Daughter Card Slot 4→Port 1/4/1.
|
2 |
Right-click on the Port icon and choose Properties. The Physical Port (Edit) form opens.
|
3 |
Configure the required general parameters.
|
4 |
Click on the WLAN tab and then click on the Network tab.
|
5 |
Click Create. The Wlan Network (Edit) form opens.
Configure the required parameters and click OK. The Access Point is created.
|
6 |
If required, configure the Access Point parameters:
-
Select the Access Point and click Properties.
-
Configure the parameters and click OK.
-
Click Apply.
|
7 |
If required, configure the Station parameters.
|
8 |
Save your changes and close the forms.
End of steps |