To configure an AA statistics TCA
Steps
1 |
Create an accounting policy and distribute the policy to the NEs that require the TCA configuration. See the NSP NFM-P Statistics Management Guide for information about creating accounting policies. Note: You must set the accounting policy Type to AA Admit Deny. |
2 |
Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens. |
3 |
Click Create→AA Accounting Policy, or select an AA accounting policy and click Properties. The AA Accounting Policy (Create | Edit) form opens. |
4 |
Configure the parameters. |
5 |
Click Apply. |
6 |
Click on the Accounting Policies tab. |
7 |
Select the AA Admit Deny entry and click Properties. The AA Accounting Configuration — AA Admit Deny (Edit) form opens. Note: If the AA Admit Deny entry is not listed, you must synchronize the global policy with a local policy definition that has the AA Admit Deny policy type configured using a CLI. |
8 |
Click Select and choose the previously configured AA Admit Deny accounting policy. |
9 |
Click OK. The AA Accounting Configuration — AA Admit Deny (Edit) form closes. |
10 |
Click OK. The AA Accounting Policy (Create | Edit) form closes. |
11 |
Click Create→AA Statistics TCA Config, or select an AA statistics TCA and click Properties. The AA Statistics TCA Config (Create | Edit) form opens. |
12 |
Configure the parameters. |
13 |
Click OK to save your changes and close the AA Statistics TCA Config (Create | Edit) form. |
14 |
Perform To configure an AA statistics TCA policer. |
15 |
Perform To configure an AA statistics TCA filter. |
16 |
Perform To configure an AA statistics TCA filter entry. |
17 |
Close the Application Assurance Policies form. End of steps |