To move a 7705 SAR-Hm NE in or out of a cellular domain

Purpose

Use this procedure to add or remove a 7705 SAR-Hm NE from a cellular domain. Adding an NE may be required when a managed NE is to be included in the domain, but has been deployed using a method other than ADP, or when an NE is to be moved from one cellular domain to another.

Steps
 

Choose Manage→Cellular Domains from the NFM-P main menu. The Cellular Domain Manager form opens.


Select a cellular domain and click Properties. The Cellular Domain [Edit] form opens.


Click on the Sites tab.


To add an NE to the domain, click Add→Add Managed Sites. The Add Managed Sites-Select Sites form opens.

Click Search to list all available NEs, select an NE, and click OK.

Note: The following conditions are required to successfully add the 7705 SAR-Hm NE to the cellular domain:

  • The NE must be in one of the domain subnets and not already in a cellular domain.

  • If the domain is in Cellular Interface mode, the NE must be part of the VPRN service for in-band management.

  • The NE must use the same mediation security policy, PDN profile policy, and software version that is used in cellular domain configuration.

  • The NE must have the domain BGP Group configured on its routing instance, with the same AS number as the domain.

  • The NE must have a BGP peer to the domain head-end node.

  • If NGE is in use, the NE and its PDN interface must be in the NGE domain. The NE must appear in the Sites tab, and the PDN interface must appear in the L3 interfaces tab.

  • If dual SIM is in use, the NE must have the same combination of cellular carriers as the other NEs in the domain.


To remove an NE from the domain, click Search to list all available NEs, select an NE, and click Delete.


Close the open forms, as required.

End of steps