To add MAC address range entries to an OmniSwitch LPS port

Overview

Perform the following procedure to add a static MAC address to an OmniSwitch LPS port.

You can add up to eight MAC address range entries. The default entry with Low MAC Range value 00-00-00-00-00-00, and High MAC Range value FF-FF-FF-FF-FF-FF, is auto-created under LPS Learned MAC Ranges tab when a port is added as an LPS port. Overlapping of Low MAC range or High MAC range is not allowed.

Steps
 

In the navigation tree Routing view, expand Network→OmniSwitch NE→Bridge Instance.


Right-click on the Bridge Instance Object icon and choose Properties. The Bridge Instance (Edit) form opens.


Choose a port and click Properties. The Learned Port Security (Edit) form opens.


Click on the LPS Learned MAC Ranges tab. By default, an entry of Low MAC range and High MAC range is displayed.


Click Create. The MAC Range (Create) form opens.


Enter the Low MAC Range and High MAC Range values.


Click OK to save your changes.


Repeat steps Step 5 to Step 7 to add up to eight MAC address range entries.


Click Apply to save the changes and close the forms.

End of steps