To create IP path monitors for PTP peers

Steps
 

Choose Tools→Synchronization Manager from the main menu. The Synchronization Manager form opens.


Configure the filter criteria, if required, and click on the Search button.


Choose a synchronization domain and click on the Properties button. The Synchronization Domain (Edit) form opens with the General tab displayed.


Perform one of the following:

  1. To create IP path monitors at the synchronization domain level, click on the PTP Peers tab button.

  2. To create IP path monitors at the synchronization group level:

    1. Click on the Sync Groups tab button.

    2. Configure the filter criteria, if required, and click on the Search button.

    3. Choose a synchronization group in the list and click on the Properties button. The Synchronization Group (Edit) form opens with the General tab displayed.

    4. Click on the PTP Peers tab button.


Under the Unmonitored tab, perform one of the following:

  1. To create unidirectional IP path monitors, click on the IP tab button.

  2. To create bidirectional IP path monitors, click on the Bidirectional IP tab button.


Configure the filter criteria, if required, and click on the Search button.


Choose one or more peers.


Click on the Create Path Monitor button. The NFM-P creates an IP path monitor and the chosen peer is removed from the list.

Note: The IP Path Monitors are created only for PTP peers for which the peer remote site ID is resolved and mapped to a CPAM-managed router.


Close the Synchronization Group (Edit) form, if applicable.


10 

Close the Synchronization Domain (Edit) form.


11 

Close the Synchronization Manager form.

End of steps