To configure an L3 interface on a DS3/E3 channel on a channelized ASAP MDA
Steps
1 |
Choose Equipment from the navigation tree view selector. |
2 |
Right-click on the device on which you want to configure an L3 interface and select Properties. The Network Element (Edit) form opens. |
3 |
On the Network Element (Edit) form navigation tree, expand the Shelf icon. |
4 |
Expand to the channel level and click on a DS3/E3 channel on a channelized ASAP MDA port. The DS3/E3 Channel (Edit) form opens. |
5 |
Click on the Policies tab to configure the policies for the DS3/E3 channel. Perform the following steps.
|
6 |
Click on the Network Interfaces tab. |
7 |
Click Create. The Create Network Interface - Routing Instance form opens. |
8 |
See To create an L3 network interface on a routing instance to create a network interface on the DS3/E3 channel. The port is set to the DS3/E3 channel by default. |
9 |
The L3 interface appears on the Network Interfaces tab. Close the DS3/E3 Channel (Edit) form. End of steps |