To configure a PVC

Before you begin

PVCs are automatically created by the device when a new L3 interface over ATM is created on the NFM-P, and when a new ILMI link is created between ATM interfaces. See To create an ILMI link for more information about creating ILMI links.

Steps
 

Choose Equipment from the navigation tree view selector.


Right-click on the device where you want to configure a PVC and select Properties. The Network Element (Edit) form opens.


On the Network Element (Edit) form navigation tree, expand the Shelf icon.


Expand to the channel level and click on a SONET/SDH ATM clear channel. The property form for the channel opens.


Click on the L3 Interfaces tab. Choose the appropriate interface from the list and click Properties. The L3 Interface form opens.


Click on the ATM tab and configure the required parameters.


Click Apply.


To view more information about the PVC:

  1. Click View PVC Connection. The ATM PVC Connection form opens.

  2. Click on the tabs to view information for the ATM PVC connection.


Click Cancel to close the ATM PVC Connection form, the L3 Interface form, and the channel form.

End of steps