To configure the IMM card type on a 7210 SAS-R
Steps
1 |
On the equipment tree, expand Network→NE→Shelf. |
2 |
Right-click on the Shelf object and choose Properties. The Shelf (Edit) form opens. |
3 |
Configure the Allow IMM Family Type parameter. The Allow IMM Family Type parameter requires an NE reboot to take effect. The Operational IMM Family Type parameter displays the card type currently in effect for the shelf. When None is enabled for the Allow IMM Family Type parameter, the default IMM family type for the NE is applied. The default for the 7210 SAS-R6 is KT1. For the 7210 SAS-R12, the default is KT2. |
4 |
Save your changes and close the form. End of steps |