To configure an IEEE 1588 PTP port on a 7705 SAR
Before you begin
You can configure the IEEE 1588 PTP port on a 7705 SAR that is configured as an IEEE 1588 PTP client. See To configure timing synchronization for information about how to configure a 7705 SAR as a PTP client.
Steps
1 |
Expand Network→NE→Shelf. |
2 |
Right-click on the Shelf object and choose Properties. The Shelf (Edit) form opens. |
3 |
Click on the Timing tab and click on PTP Port Properties. The PTP Port (Edit) form opens. |
4 |
Configure the required parameters. Note: The Master 1 and 2 clock recovery statistics are available on the Recovered Clock History Master tabs. |
5 |
Save your changes and close the forms. End of steps |