To configure a power supply tray

Steps
 

On the equipment tree, expand Network→NE→Shelf→Power Supplies→Power Supply Tray.


Right-click on a power supply tray and choose Properties. The Power Supply Tray (Edit) form opens.


Configure the required parameters.


Configure the Power Supply Type parameter from the drop-down menu.

Note: If you are configuring for OS 6465-P6 and OS 6465-P12, depending on the power supply unit type (Third Party, ALE, or Phoenix Contact) the form displays different options. Select one of the following, as appropriate:

  • Third Party - The Power (Watts) ranges from 50W to 200W.

  • ALE - Select the Power Supply Input Type parameter from the drop-down menu. The default values for Power (Watts) are LO-AC = 75W, HI-AC = 240W, 24VDC = 240W, and 48VDC = 240W.

  • Phoenix Contact - Select the Power Supply Input Type parameter from the drop-down menu. The default values for Power (Watts) are 24VDC = 240W, 48VDC = 240W.


Save your changes and close the form.

End of steps