To select system resource profile policies for the 7210 SAS-R or 7210 SAS-S/Sx VC
Purpose
For the 7210 SAS-R or 7210 SAS-S/Sx VC, system resource allocations are configured in a system resource profile policy. See To configure a system resource profile policy for the 7210 SAS-R/T/Mxp, 7210 SAS-S/Sx, or 7210 SAS-S/Sx VC .
Perform the following procedure to assign a policy to the card slot of a 7210 SAS-R or 7210 SAS-S/Sx VC. You must distribute the policy to the device first.
Note: When the policy is assigned to a card slot and the SAP Aggregate Meter parameter is modified, you must reboot the card or the node for the modified value to take effect.
Steps
1 |
On the equipment tree, expand Network→7210 SAS-R or 7210 SAS-S/Sx VC→Shelf→Card Slot n. |
2 |
Right-click on the card slot object and choose Properties. The Card Slot form opens. |
3 |
Click on the IO Card tab and select a policy in the System Resource Profile Policy panel. |
4 |
To view the currently effective resource profile for the card slot, click on the Active Resource Profile tab. |
5 |
Click OK and confirm your changes. The form closes. End of steps |