To configure an MLPPP bundle for multiclass service transmission

Purpose

Perform the following procedure to configure an existing MLPPP group bundle for multiclass service transmission.

Consider the following before you start to configure an MLPPP bundle for multiclass service transmission.

  • Only channelized ASAP MDAs on the 7705 SAR and 7750 SR support multiclass MLPPP.

  • You need to configure multiclass MLPPP before you add bundle members to the multilink bundle.

  • Ports configured in network mode do not support multiclass MLPPP.

  • Multiclass MLPPP is not supported when LFI is enabled.

Steps
 

On the equipment tree, right-click on an NE and choose Properties. The Network Element (Edit) form opens.


On the NE navigation tree, expand Shelf→Card Slot n→Daughter Card Slot n→Bundles.


Right-click on an MLPPP group bundle object and choose Properties. The Multilink Bundle (Edit) form opens.


Click on the MLPPP tab and configure the required parameters.

Note: The Magic Number parameter is configurable only on channelized ASAP MDAs on 7750 SR NEs.

You can apply QoS profiles to an MLPPP bundle only if the Class Count parameter is set to 4.


Save your changes and close the form.

End of steps