To configure a TCA policy

Steps
 

Choose Tools→TCA Policies from the NFM-P main menu. The TCA Policies form opens.


Choose TCA Policy (TCA Policy) and click Create. The TCA Policy (Create) form opens.


Configure the general parameters.


Select a monitored object and click Apply.

Note: The panels displayed on the General tab vary, depending on the type of monitored object.


To configure utilization TCA rules:

  1. Configure the parameters in the Utilization panel.

  2. Click Create in the Rules panel. The PercentageTCARule, tca.UtilizationTCA-0 (Create) form opens.

  3. Configure the parameters and click OK.

    Note:

    You cannot create two rules that have the same Threshold (%) and Threshold Direction values.


To configure error TCA rules:

  1. Configure the parameters in the Error panel.

  2. Click Create in the Rules panel. The PercentageTCARule, tca.ErrorTCA-0 (Create) form opens.

  3. Configure the parameters and click OK.

    Note:

    You cannot create two rules that have the same Threshold (%) and Threshold Direction values.


To configure drop TCA rules:

  1. Configure the parameters in the Drop panel.

  2. Click Create in the Rules subpanel. The PercentageTCARule, tca.DropTCA-0 (Create) form opens.

  3. Configure the parameters and click OK.

    Note:

    You cannot create two rules that have the same Threshold (%) and Threshold Direction values.


To configure custom TCA rules:

  1. In the Custom panel, click Create. The CustomTCA (Create) form opens.

  2. Configure the parameters.

  3. Select a Custom TCA Profile.

  4. Click Create in the Rules panel. The CustomTCARule, tca.CustomTCA-0 (Create) form opens.

  5. Configure the parameters and click OK.


Apply the TCA Policy to one or more monitored objects:

  1. Click on the Monitored Objects tab.

  2. Click Add. The Select form opens.

  3. Select the required objects and click OK.


10 

Click OK to save your changes and close the TCA Policy (Edit) form.


11 

Close the TCA Policies form.

End of steps