To configure NE configuration rollback file storage

Purpose

Perform this procedure to configure the storage location for the NE configuration rollback rescue file or checkpoint files. To configure NE configuration rollback file storage locations, FTP must be configured on the device.

Steps
 

Choose Administration→NE Maintenance→NE Configuration Rollback from the NFM-P main menu. The NE Configuration Rollback form opens.


Click on the NE Rollback tab. The NE Rollback list form opens.


Choose a device and click Properties. The NE Rollback (Edit) form opens.


To configure the storage location for the NE configuration rollback rescue file:

  1. In the Rescue File panel, configure the Rescue File Location Type parameter.
    • If you specified FTP, in the Rescue File — Remote Location panel, configure the required parameters.

    • If you specified CFLASH, in the Rescue File — CFLASH panel, configure the required parameters.

  2. Save your changes.


To configure the storage location for the NE configuration rollback checkpoint files:

  1. In the Checkpoint File Storage panel, configure the required parameters.

  2. Configure the Rollback Location Type parameter.
    • If you specified FTP, in the Checkpoint File Storage — Remote Location panel, configure the required parameters.

    • If you specified CFLASH, in the Checkpoint File Storage — CFLASH panel, configure the required parameters.

  3. Save your changes. The Checkpoint Files tab lists the checkpoint files.


Close the forms.

End of steps