Sample deployment policy configuration
Example details and settings
The following example describes the configuration and operation of an NFM-P deployment policy. See To configure the NFM-P deployment policy for deployment policy configuration information.
The example policy settings are as follows:
-
Auto Save Scheme—Every Nth Successful Deployment
Initiate a device configuration save after the number of configuration changes specified by Auto Save Threshold.
-
Initiate a configuration save after every three successful deployments, if Auto Save Scheme is set to Every Nth Successful Deployment.
-
Do not perform a scheduled configuration save on any NE.
-
Scheduled Save Interval—1 hour
If scheduled saves are enabled, perform a save every hour.
-
Save only non-default parameter values.
-
Configuration Save Interval—30 seconds
Delay consecutive configuration save requests for an NE that are less than 30 seconds apart.
-
Wait up to five Configuration Save Interval periods before performing a configuration save.
-
Retry Scheme—Retry Number Of Times
Retry each deployment the number of times specified by Retry Interval.
-
Wait five minutes before retrying a failed deployment.
-
Retry each failed deployment three times.