To create a radio link

Purpose

Perform this procedure to create a radio link between NEs. You can create a link between a GNE radio interface and a managed port that has radio properties, or between two GNE radio interfaces.

You can monitor a GNE radio link endpoint when the associated GNE profile includes the appropriate GNE driver. See GNE commissioning for information about using GNE profiles. See Chapter 7, Device management using drivers for information about drivers.

Steps
 
1 

Choose Create→Equipment→Radio Link from the NFM-P main menu. The Radio Link (Create) form opens.

2 

Configure the required parameters.

3 

Use the Select buttons to choose the Endpoint A and Endpoint B objects.

4 

Save your changes and close the Radio Link (Create) form.

End of steps