To create a card migration event

Steps
 

Choose Tools→Card Migration Event Manager from the NFM-P main menu. The Card Migration Event Manager form opens.


Click Create. The Card Migration Event (Create) form opens with the General tab displayed.


Configure the general parameters.


Click on the NE Migration Candidates tab and click Add. The Select Network Elements - Card Migration Event form opens.


Select one or more NEs and click OK. The Select Network Elements - Card Migration Event form closes and the NEs are listed on the Card Migration Event (Create) form.


Select one or more NEs and click Properties. The Network Element Migration Candidates form opens.


Configure the Auto Reboot parameter and click OK.


Click on the Card Migration Candidates tab and click Add. The Select Cards - Card Migration Event form opens.


Select one or more cards and click OK. The Select Cards - Card Migration Event form closes and the cards are listed on the Card Migration Event (Create) form.


10 

Select one or more cards and click Properties. The Migration Details (Create) form opens.


11 

Configure the New Type parameter in the IOM, MDA 1, or MDA 2 panels, as required, and click OK.


12 

To execute the migration event immediately, perform the following steps. Otherwise, you can execute the migration later by performing To execute a saved card migration event .

  1. Use the NFM-P to back up the device configuration of each target NE.

    Note:

    When you attempt a migration on an NE that does not have a recent configuration backup in the NFM-P database, the NFM-P raises an alarm and the migration fails.

    A recent configuration backup is a backup that occurs after the latest configuration save on the NE.

  2. Click Apply. The NFM-P saves the card migration event configuration.

  3. Click on the General tab to display the Status indicator.

  4. Click Initiate Migration and click Yes. The NFM-P starts to migrate the specified cards.

  5. Monitor the card migration as it progresses by viewing the Status indicator on the form. The status can be one of the following:

    • Awaiting manual reboot to complete migration

    • Failed - Latest configuration not available

    • Failed - Unable to migrate configuration

    • Failed - Unable to reboot network element

    • Failed - Unable to transfer migrated configuration

    • Migration completed

    • Not Started

    • Rebooted network element

    • Started

    • Swap failed

    • Swap failed on some network elements


13 

Save your changes and close the form.

End of steps