To create a transform function for a GNE alarm catalog
Steps
1 |
Choose Administration→Generic NE Manager from the NFM-P main menu. The Generic NE Manager form opens. |
2 |
Click Create and choose Create Generic NE Alarm Catalogue. The Generic NE Alarm Catalogue form opens. |
3 |
Click on the Transform Functions tab and click Create. The Generic NE Alarm Transform Function form opens |
4 |
Configure the required parameters. |
5 |
If you enabled the Specify Default Out Value parameter, select a value beside the Default Out Value parameter. |
6 |
Click on the Pairs tab and click Create. The Pair form opens. |
7 |
Configure the In Value parameter. |
8 |
Select a value beside the Out Value parameter. |
9 |
Click OK and confirm your actions. The form closes. |
10 |
Repeat Step 6 to Step 9 to add another value pair, if required. |
11 |
Click OK and confirm your actions. The form closes. |
12 |
Repeat Step 3 to Step 11 to create another transform function, if required. |
13 |
Save your changes and close the forms. End of steps |