To change from SNMPv2 to SNMPv3 management of a device
Purpose
Perform this procedure to change the management protocol that the NFM-P uses for a device from SNMPv2 to SNMPv3.
Steps
1 |
Perform To enable SNMPv3 management of a device to do the following: |
2 |
Perform To configure device mediation to configure an SNMPv3 mediation policy. |
3 |
Modify the mediation policy of the managed device that you need to change from SNMPv2 to SNMPv3:
|
4 |
Perform To configure a discovery rule to configure a new discovery rule for the SNMPv3 device. |
5 |
Edit the SNMPv2 discovery rule for the device to exclude the device from discovery. |
6 |
Use a CLI session on the device to remove the following items, which are no longer required: |
7 |
Resynchronize the device with the NFM-P; see To partially or fully resynchronize NEs with the NFM-P database. End of steps |