To configure an AA subscriber policy override on an ISA-AA group or partition

Before you begin

If partitions are disabled on an ISA-AA group, subscriber policy overrides are configured directly on the group. If partitions are enabled on an ISA-AA group, subscriber policy overrides are configured on the individual partitions within the group.

The AA subscriber policy override is rejected if the subscriber does not have an application profile assigned. You can add an AA subscriber policy override to a SAP or Spoke SDP, but not to an ESM subscriber.

Steps
 

If you are performing this procedure as part of the ISA-AA group or partition configuration described in To configure an ISA-AA group and ISA-AA partitions , go to Step 4 .


On the Equipment tree, expand [NE]→Logical Groups→ISA-AA Groups→ISA-AA Group n.


Right-click on the ISA-AA Group n icon and choose Properties. The ISA-AA Group (Edit) form opens.


If you are configuring the subscriber policy override on an ISA-AA partition, perform the following steps.

  1. Click on the ISA-AA Partitions tab.

  2. Select a partition in the list and click Properties. The ISA-AA Group Partition (Edit) form opens.


Click on the AA Subscriber Policy Overrides tab.

Note: An AA subscriber policy override is rejected if the subscriber does not have an assigned application profile.


Click Create or select an existing policy override entry and click Properties. The AA Subscriber Policy Override (Create|Edit) form opens.


Configure the AA Subscriber Type parameter.


Perform one of the following, based on the AA Subscriber Type parameter setting:

  1. If it is SAP, select a SAP subscriber in the SAP Subscriber panel.

  2. If it is Spoke SDP Binding, select a spoke SDP binding subscriber in the Spoke SDP Binding Subscriber panel.

  3. If it is Transit, select a transit subscriber in the Transit Subscriber panel.


Click on the ASO Characteristics tab.

  1. Click Create or select an existing policy override ASO characteristic entry and click Properties. The AA Subscriber Policy Override ASO Characteristic (Create|Edit) form opens.

  2. Select an override ASO characteristic.

  3. Select an override ASO characteristic value.


10 

Save your changes and close the forms.

End of steps