To configure a CCAG

Steps
 

On the Equipment tree, expand NE→Logical Groups→CCAGs.


Right-click on the CCAGs icon and choose Create CCAG, or right-click an existing CCAG object and choose Properties. The CCAG (Create|Edit) form opens.


Configure the required parameters.


Click Apply.


Click on the CCAG MDA Members tab to configure CCAG MDA members.


Click Create or select an existing CCAG MDA member and click Properties. The CCAG MDA Member (Create|Edit) form opens.

  1. Select an MDA to add to the CCAG.

  2. Save and close the form.


Click on the CCAG Paths tab to modify the internal paths for the CCAG. The Alpha and Beta paths are displayed.

  1. Select a path and click Properties. The CCAG Internal Path (Edit) form opens.

  2. Configure the required parameters.

  3. Click on the Path Cross Connects tab to configure cross-connects for the CCAG internal path, as outlined in Step 8 .

  4. Save your changes and close the form.


Click on the Path Cross Connects tab to modify the path cross-connects associated with the CCAG.

  1. Select a cross-connect entry and click Properties. The Cross Connect (Edit) form opens.

  2. Configure the required parameters.

  3. Click on the Policies tab to specify non-default ingress and egress queue policy settings.

  4. To specify an egress slope policy other than the default, click Clear in the Egress Slope Policy panel and select an alternate policy.

  5. Configure the Egress Reserved CBS parameter.

  6. To specify an ingress slope policy other than the default, click Clear in the Ingress Slope Policy panel and select an alternate policy.

  7. Configure the Ingress Reserved CBS parameter.


Save your changes and close the forms.

End of steps