To configure AA subscriber statistics collection on an ISA-AA group or partition

Before you begin

If partitions are disabled on an ISA-AA group, subscriber statistics objects are configured directly on the group. If partitions are enabled on an ISA-AA group, subscriber statistics objects are configured on the individual partitions within the group.

Steps
 

If you are performing this procedure as part of the ISA-AA group or partition configuration described in To configure an ISA-AA group and ISA-AA partitions , go to Step 4 .


On the Equipment tree, expand [NE]→Logical Groups→ISA-AA Groups→ISA-AA Group n.


Right-click on the ISA-AA Group n icon and choose Properties. The ISA-AA Group (Edit) form opens.


If you are configuring the subscriber statistics objects on an ISA-AA partition, perform the following steps.

  1. Click on the ISA-AA Partitions tab.

  2. Select a partition in the list and click Properties. The ISA-AA Group Partition (Edit) form opens.


Click on the AA Subscriber Stats Objects tab.

  1. Click Add and choose one of the following options:

    • Application

    • Application Group

    • Charging Group

    • System Protocol

    • Custom Protocol

    The Select object_type form opens and lists the available objects of the chosen type.

  2. Select an object and click OK. The Select object_type form closes and the AA Subscriber Stats Object Config form opens.

  3. Configure the parameters in the Export Method Selection panel.


Save your changes and close the forms.

End of steps