To configure special study objects on an ISA-AA group or partition

Before you begin

If partitions are disabled on an ISA-AA group, special study objects are configured directly on the group. If partitions are enabled on an ISA-AA group, special study objects are configured on the individual partitions within the group.

Steps
 

If you are performing this procedure as part of the ISA-AA group or partition configuration described in To configure an ISA-AA group and ISA-AA partitions , go to Step 4 .


On the Equipment tree, expand [NE]→Logical Groups→ISA-AA Groups.


Right-click on the ISA-AA Group n icon and choose Properties. The ISA-AA Group (Edit) form opens.


If you are configuring the special study objects on an ISA-AA partition, perform the following steps.

  1. Click on the ISA-AA Partitions tab.

  2. Select a partition in the list and click Properties. The ISA-AA Group Partition (Edit) form opens.

  3. Click on the AA Special Study tab.


To configure special study subscribers on the ISA-AA group or partition, click on the Subscribers sub-tab.

  1. Click Create or select an existing special study subscriber and click Properties. The AA Special Study Subscriber Config (Create|Edit) form opens.

  2. Configure the AA Subscriber Name and AA Stats Type parameters.

  3. Save your changes and close the form.


To configure special study subscribers on the ISA-AA group or partition, click on the SAPs sub-tab.

Click on one or more of the following buttons and use the list form that opens to select one or more objects, as required:

  • Add Per-SAP Protocols—to add a SAP for per-protocol monitoring

  • Add Per-SAP Applications—to add a SAP for per-application monitoring


To configure special study spoke SDP bindings on the ISA-AA group or partition, click on the Spoke SDP Bindings sub-tab.

Click on one or more of the following buttons and use the list form that opens to add one or more objects, as required:

  • Add Per-Spoke SDP Binding Protocols—to add a SAP for per-protocol monitoring

  • Add Per-Spoke SDP Binding Applications—to add a SAP for per-application monitoring


To configure special study transit subscribers on the group or partition, click on the Transit Subscribers sub-tab.

  1. Click Create or select an existing transit subscriber entry and click Properties. The AA Special Study Transit Subscriber Config (Create|Edit) form opens.

  2. Select a transit subscriber.

  3. Configure the AA Stats Type parameter.


To configure special study ESM subscribers on the ISA-AA group or partition, click on the ESM Subscriber Host sub-tab.

  1. Click Create. The AA Special Study ESM Subscriber Host Config (Create) form opens.

  2. Configure the AA ESM Subscriber Host Name and AA Stats Type parameters.

  3. Save your changes and close the form.


10 

Save your changes and close the forms.

End of steps