To configure an ISA-LNS group

Before you begin

You can configure an IES or VPRN group interface to terminate LNS PPP sessions. See Chapter 78, IES management for information about configuring an IES group interface. See Chapter 79, VPRN service management for information about configuring a VPRN group interface.

Steps
 

On the Equipment tree, expand [NE]→Logical Groups→ISA-LNS Groups.


Right-click on the ISA-LNS Groups icon and choose Create ISA-LNS Group, or right-click an existing ISA-LNS group object and choose Properties. The ISA-LNS Group (Create|Edit) form opens.


Configure the required parameters.


Select a port policy.


Click Apply.


Click on the ISA-LNS Group Members tab.

  1. Click Create or select an existing LNS group member entry and click Properties. The ISA-LNS Group Member (Create|Edit) form opens.

    Note:

    You can configure up to six ISA-LNS group members. For each group member, you must choose an ISA Broadband Applications MDA. An ISA Broadband Applications MDA can be configured only on an IOM3-XP module on a 7750 SR, Release 20.10 and earlier.

  2. Select the LNS group member MDA.

  3. Repeat 1 and 2 to configure additional LNS group members, if required.


Save your changes and close the forms.

End of steps