To configure an ISA-Video group

Before you begin

An ISA-Video group supports ISA or ESA-VM video group members, and not a mix of group members under the same ISA-Video group.

Steps
 

On the Equipment tree, expand [NE]→Logical Groups→ISA-Video Groups.


Right-click on the ISA-Video Groups icon and choose Create ISA-Video Group, or right-click an existing ISA-video group object and choose Properties. The ISA-Video Group (Create|Edit) form opens.


Configure the required parameters.


Click Apply.


To specify ISA video group members:

  1. Click on the Video Group Members tab.

  2. Click Create or select an existing video group member entry and click Properties. The Video Group Member (Create|Edit) form opens.

  3. Select the video group member card.

  4. Repeat 2 and 3 to configure additional group members, if required.


To specify ESA-VM video group members:

  1. Click on the ESA Video Group Members tab.

  2. Click Create or select an ESA existing video group member entry and click Properties. The ESA Video Group Member (Create|Edit) form opens.

  3. Select the video group member card.

  4. Repeat 2 and 3 to configure additional group members, if required.


Save your changes and close the forms.

End of steps