To configure the RADIUS CoA port on an NE

Purpose

Perform this procedure to configure the RADIUS change of authorization port on an NE.

Note: You cannot configure the RADIUS CoA port on the 7950 XRS.

Steps
 

On the equipment tree, right-click on an NE and choose Properties. The Network Element (Edit) form opens.


Click on the Globals tab, then on the RADIUS tab.


Configure the RADIUS CoA Port parameter.

Note: If the routing instance is bound to a RADIUS proxy server and the RADIUS CoA port is set to 1812, all CoA messages are received by the RADIUS proxy server and dropped by port 1812.


Save your change and close the form.

End of steps