To enable or disable ICMP extensions on a NE
Purpose
Use this procedure to configure the use of vendor-specific ICMP extensions on the 7950 XRS, 7450 ESS, 7705 SAR, and 7750 SR NEs. Network operators can use the information provided by the ICMP extensions to diagnose routing problems. By default, ICMP extensions are disabled on devices.
Steps
1 |
On the equipment tree, right-click on a NE and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the ICMP tab. |
3 |
Configure the Vendor-Specific ICMP Extensions parameter. |
4 |
Save your changes and close the form. End of steps |