To configure DHCPv6 Advertise messages on an NE
Purpose
Complete this procedure to specify which DHCPv6 client applications on an NE are sent NO_ADDRS_AVAILABLE messages when the server runs out of addresses.
Steps
1 |
On the equipment tree, right-click on an NE and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the Globals tab, then on the Subscriber Management tab. |
3 |
On the DHCPv6 panel, specify one or more DHCPv6 Advertise message format options for the Advertise Message parameter, and configure other required parameters if available. |
4 |
Save your changes and close the form. End of steps |