To configure two WRED slopes on a 7210 SAS

Purpose

The 7210 SAS-D and 7210 SAS-M support three WRED slopes per queue:

  • High priority/in-profile TCP

  • Low priority/out-of-profile TCP

  • Non-TCP

Perform this procedure to specify whether only the high priority and low priority slopes are used, and non-TCP slopes are ignored.

Steps
 

On the equipment tree, right-click on a 7210 SAS NE and choose Properties. The Network Element (Edit) form opens.


Click on the QoS tab.


Configure the Use WRED Slopes parameter.


Save your changes and close the form.

End of steps