To configure serial ports
Purpose
Perform this procedure to configure serial ports on a 12 × Serial Data card on the 7705 SAR.
Steps
1 |
On the equipment tree, navigate to the port object where you want to configure a serial port. The path is Network→NE→Shelf→Card Slot n→Daughter Card Slot n→Port n/n/n. |
2 |
Right-click on a port icon and choose Properties. The Physical Port (Edit) form opens. |
3 |
Configure the required parameters. |
4 |
Click on the States tab and configure the Administrative State parameter. |
5 |
Save your changes and close the form. End of steps |