To configure PoE ports on a 7705 SAR
Before you begin
You can configure PoE on a 7705 SAR-H, 7705 SAR-Hc, 7705 SAR-W, and 7705 SAR-Wx.
Note: You can view information about power consumption and availability on the PoE tab of the shelf properties form.
Steps
|
|
1 |
On the equipment tree, navigate to the port object where you want to configure PoE. The path is Network→NE→Shelf→Card Slot→Daughter Card Slot→Port n/n/n.
|
2 |
Right-click on the port on which you want to configure PoE and choose Properties. The Physical Port (Edit) form opens.
|
3 |
Click on the PoE tab and configure the PoE Mode parameter.
|
4 |
Save your changes and close the form.
|
5 |
If you are configuring a 7705 SAR-H, perform the following steps to configure the PoE power supply source.
-
On the equipment tree, right-click on the 7705 SAR-H device on which you want to configure PoE and choose Properties. The Network Element (Edit) form opens.
-
On the Network Element (Edit) form navigation tree, expand the Shelf object and the Card Slot object.
-
If you are configuring a 7705 SAR-H, Release 6.1 or later, right-click on the Daughter Card Slot object and choose Properties. The Daughter Card Slot (Edit) form opens.
If you are configuring an earlier release 7705 SAR-H, right-click on the Shelf object and choose Properties. The Shelf (Edit) form opens.
-
Configure the PoE Power Supply Source parameter in the PoE panel.
-
Save your changes and close the form.
End of steps |