To configure a channelized TDM DS1 or E1 port
Steps
1 |
On the equipment tree, right-click on the device where you need to configure a channelized TDM DS1 or E1 port and select Properties. The Network Element (Edit) form opens. |
2 |
On the Network Element (Edit) form navigation tree, expand to the port level and click on a port object that contains a channelized DS1 or E1. The Physical Port (Edit) form opens. |
3 |
Configure the required parameters. |
4 |
Click on the DS1/E1 tab and configure the required parameters. All ports are automatically configured to the same port type when the first port is configured. A mix of DS1 and E1 ports is not supported. |
5 |
Click on the States tab and configure the Administrative State parameter. |
6 |
Save your changes and close the form. End of steps |