Shelf parameters
Interface Name
Click on the Select button beside the Interface Name parameter and select a timing reference.
Port or Channel Name
Click on the Select button beside the Port or Channel Name parameter and select a timing reference. When configuring Timing Reference One on a 7210 SAS-D ETR, only ports 1 to 4 can be selected. When configuring Timing Reference Two on a 7210 SAS-D ETR, only ports 5 and 6 can be selected. Ports 7 to 10 can be selected for any timing reference.
Quality Level Override
This parameter specifies the quality level used for SETS input selection. This value overrides any value received by the SSM process of that reference.
Table A-19: Quality Level Override parameters
Parameter |
Description |
Options |
---|---|---|
Quality Level Override (firstTimingReferenceQualityLevel) |
Specifies the quality level used for the first timing reference for SETs input selection. |
None Prs Stu St2 Tnc St3e St3 Prc Ssua Ssub Sec Eec1 Eec2 |
Quality Level Override (secondTimingReferenceQualityLevel) |
Specifies the quality level used for the second timing reference for SETs input selection. | |
Quality Level Override (bitsQualityLevel) |
Specifies the quality level used for the reference for SETs input selection. | |
Quality Level Override (ptpQualityLevel) |
Specifies the quality level used for the reference for SETs input selection. |
Radio Name
The Radio Name parameter specifies specifies a description for the MW Link Member. The range is 0 to 32 characters.