To configure a RADIUS proxy server on a routing instance
Steps
1 |
In the navigation tree routing view, expand Network→NE→Routing Instance. |
2 |
Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens. |
3 |
Click on the RADIUS tab, then the RADIUS Proxy Servers tab. |
4 |
Click Create or select an existing RADIUS proxy server and click Properties. The RADIUS Proxy Server (Create|Edit) form opens. |
5 |
Configure the parameters as required. |
6 |
Select a Python Policy, if required. If you intend to configure a WLAN GW group with a distributed Python policy in Step 7, the Python policy you select in this step must be the same Python policy that is distributed to the WLAN GW group. |
7 |
Click Select in the WLAN GW panel to assign a ISA-WLAN GW Group, if required. |
8 |
Configure default RADIUS policies: Perform the following steps:
|
9 |
Click on the Caching tab and configure the parameters as required. |
10 |
Click on the Interfaces tab and click Create or select an existing network Interface and click Properties. The RADIUS Proxy Interface form opens. Perform the following steps:
|
11 |
Click on the Attribute Matching/Users tab to configure RADIUS attribute matching type and matching entries for RADIUS policies. Perform the following steps:
|
12 |
Save your changes and close the forms. End of steps |