To display show router fp-tunnel information for a routing instance

Purpose

Perform this procedure to display show router fp-tunnel information for a routing instance including the IOM/IMM label, next hop, and outgoing interface information for BGP, LDP and RSVP tunnels.

Steps
 

In the navigation tree routing view, expand Network→NE→Routing Instance.


Right-click on the Routing Instance icon and choose Show FP Tunnel Table from the menu. The FP RTR Show FP Tunnel Table form appears.


Configure the parameters as required.


Click OK. The fp rtr Show FP Tunnel table opens and a CLI session is initiated.The FP tunnel table information for a routing instance is displayed.

End of steps