To configure UDP relay, DHCP snooping, and DHCP Option 82 on OmniSwitch routing instances
Note: DHCPv6 snooping is supported only for standard VLAN on the OS 6450.
Note: The routing instance must be the default routing instance.
UDP Server Statistics/UDP Service Statistics will be lost as part of the parent change from Bridge Instance to Routing Instance.
Steps
|
|
1 |
In the navigation tree routing view, expand Network→OmniSwitch→Routing Instance.
|
2 |
Right-click on the routing instance icon and choose Properties. The Routing Instance (Edit) form opens.
|
3 |
Click on the UDP Relay tab to configure UDP relay if required.
|
4 |
Configure the required parameters in the UDP BOOTP/DHCP Relay General Configuration panel.
|
5 |
Configure the parameters in the Relay Information Configuration panel if you need to use the DHCP Option 82 functionality.
|
6 |
Configure the PXE Support parameter if you need support for PXE devices.
|
7 |
Click on the DHCP Snooping tab to configure DHCP snooping.
In the DHCPv6 Snooping Configuration panel, configure the DHCPv6 Snooping Mode parameter from the drop-down menu.
|
8 |
Configure the parameters as required.
|
9 |
Click on the Relay Services tab to configure UDP port relay services if required. Perform the following steps:
-
Click Create.
-
Configure the UDP Relay Service parameter.
If you selected the Other option, configure the Relay Service Port and Relay Service Description parameters.
-
Save your changes and close the form. The Routing Instance (Edit) form reappears.
|
10 |
Click on the Relay Destinations tab and click Create. The Create UDP Service Destinations form opens.
|
11 |
Click Select. The Select UDP Service - UDP Relay Service Destination form opens. Perform the following steps:
-
Choose a UDP relay service and click OK.
-
Configure the Forwarding Address parameter, if required.
-
Click Next. The Select VLANs step is displayed.
-
Configure the search filter and click Search. The Select VLANs form displays the VLANs that match the search criteria.
-
Choose one or more VLANs to be used to forward the UDP traffic.
-
Click Finish. The selected VLANs appear in the relay destinations list and the Routing Instance (Edit) form reappears.
|
12 |
Save your and close the form.
End of steps |