To configure an MC LAG group member

Steps
 
1 

Choose Manage→Redundancy→Node Redundancy from the NFM-P main menu. The Manage Node Redundancy form opens.

2 

Choose MC LAG Group (Multi-Chassis) and click Search.

3 

Select an MC LAG and click Properties. The MC LAG Group (Edit) form opens.

4 

Configure the required parameters.

Note: The LACP Key, System ID, and System Priority parameters must be left at the default when the Standby Signalling parameter is set to Power Off.

5 

Click on the States tab.

6 

Configure the members in the First Site and Second Site panels.

Use the following steps:

  1. Click Properties. The MC Peer (Edit) form opens.

  2. Click on the MC LAG tab and configure the required parameters.

    Note:

    If you change the default values of the Keep-Alive Interval (deciseconds) and Lost Connection Wait Interval parameters, the MC LAG group configuration of the member sites is not removed when the MC LAG group is deleted. You can view the MC LAG member information under the LAG icon in the network view of the navigation tree.

7 

Save your changes and close the forms.

End of steps